MIL-PRF-62413B(AT)
4.3 Conformance inspection.
4.3.1 Sampling. Samples from an inspection lot for conformance inspection shall be
selected in accordance with ANSI/ASQ Z1.4. Each sample selected shall be inspected as
specified herein for the defects listed in table III. Conformance to a lot shall be accepted when
zero (0) defects are found and rejected when one (1) or more defects are found.
4.3.2 Examination. Each sample selected according to 4.3.1 shall be inspected as
specified in table II and shall be free from any defect as listed in table III.
TABLE III. Classification of defects.
Method of
Category
Defect
examination
Critical
None
Major:
101
Assembly, incomplete (see 3.3.1).
Visual
102
Dimensions affecting interchangeability, out of
SIE 1/
tolerance (see 3.3 and 3.3.1).
103
Weight not as specified (see 3.3.2).
Scale
104
Workmanship, faulty affecting performance
Visual
(see 3.7).
Minor:
201
Dimensions not affecting interchangeability not
SIE
within tolerance (see 3.3.1).
202
Marking, improper (see 3.6).
Visual
203
Workmanship, faulty affecting appearance (see 3.7).
Visual
1/ SIE = Standard Inspection Equipment.
4.3.3 Classification of defects. For examination purposes, defects shall be classified as
listed in table III.
4.3.4 Acceptance tests. Each pickup shall be subjected to the acceptance tests specified
in table II.
4.4 Methods of inspection.
4.4.1 Materials. Conformance to 3.2 thru 3.2.3 shall be determined by inspection of
contractor records providing proof or certification that materials conform to requirements.
Applicable records shall include drawings, specifications, design data, receiving inspection
records, processing and quality control standards, vendor catalogs and certifications, industry
standards, test reports, and rating data.
4.4.2 Defects. Conformance to 3.3 through 3.3.2, 3.6 and 3.7 shall be determined by
examination for the defects listed in table III. Examination shall be visual, tactile, or by
measurement with standard inspection equipment.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business